A supplier of Grassland and Forage Irrigation Systems throughout the United States and Canada

System Components

The K-Line system is designed around a set of components chosen for

their durability and  ease of use under adverse conditions.

                                                                                                   

     K-Line offers a choice of 5 NAAN          A choice of 5 Nelson nozzles allows            The K-Line system is available

   sprinklers with  application rates of            for varied application rates of 1.64 -            with Nelson pressure compensating     2.04 to 5.11 gpm and operating                         5.47 gpm at 45 - 60 psi                      sprinklers which results in very 

        pressures of 35 - 55 psi                                                                                          good uniformity in hilly applications

                                                                                                                                      This is a highly dependable rotary

                                                                                                                                      style sprinkler made from heavy duty

                                                                                                                                      plastics. The key fact about the

                                                                                                                                      Windfighter is that it can accomplish

                                                                                                                                      greater uniformity in systems with

                                                                                                                                      wind interference that would affect

                                                                                                                                      the uniformity of most impact

                                                                                                                                      sprinklers.

                          NAAN Sprinkler Rates                                                     Nelson Sprinkler Rates

          

          

The tough one piece rotary molded K-Line pods which          The specially formulated  polyethylene tubing is the key component

house the sprinklers are made of very strong impact and         to the system.  This tubing is made of linear low density polyethylene

abrasion resistant UV-protected polyethylene that should        resins that make it very strong yet flexible when used in the K-Line

last for years. The heavy duty skid plate on the bottom           system. This tubing can withstand the effects of abrasive soils,  

gives the pod a low center of gravity. The heavy duty             kinking, freezing, the damage from UV light, and the various stresses

construction is  designed to withstand the rigors of being         exerted on the tubing while moving from set to set. K-Line tubing

pulled across rough and uneven ground. The unique saddle     is available in two sizes 32mm and 40mm, (slightly larger than 1 1/4 quickly bolts into place with only two nuts to tighten down.     and 1 1/2 inch pipe).     

Animal guards are an option.

An assortment of heavy duty plastic fittings are available for coupling the tubing or connecting to valves, reducers, quick couplings,

unions, and end rings. These fittings are made from a high grade glass reinforced nylon which makes them extremely durable and

impact resistant.   The double barbed insert is designed with extra length for maximum grip on the inner wall of the tubing.  With

the added strength from the threaded compression nut these fittings bite into the inner and outer wall of the tubing creating an

incredible tubing connection that is every bit as tough and durable as every other component in the K-line system. Our galvanized

hook cap provides a simple way to tow the system from set to set.

'K-Line Irrigation' is a registered trademark and the K-Line Irrigation system protected by

NZ PAT No 331985, AU PAT No 734210, US PAT No 6398131, US PAT No 6601775, ZA PAT No 2001/2856, CA Pat Appl No 2344281