A supplier of Grassland and Forage Irrigation Systems throughout the United States and Canada
Installation
Click below to see Installation Video
The K-Line System is designed around a series of components
selected for their extreme durability and ease of use.
K-Line Sprinkler Pods
The pods are manufactured with the u-bolt for the sprinkler saddle molded right
into the bottom to aid in a quick easy installation. Simply slide the pods onto the
pipe to your specific spacing as designed by your dealer, drill the pipe and attach
the sprinkler saddle. These pods will protect the important sprinkler components
year after year.
K-Line Tubing
During installation, roll out the tubing to the appropriate length and install your
pods and sprinklers with the green lines of the tubing facing up. The sizes are
easily identified by the bright green lines imprinted the length of the pipe, two
lines for the 40mm and 1 line for 32mm. The design of the tubing ensures no
memory which eliminates any twisting or rolling of the tubing during
installation or use.
K-Line Sprinkler Options
There are three reliable sprinkler packages available for the k-line system. The
first is the NAAN 5022 Impact sprinkler this sprinkler has a solid one piece body
constructed of heavy duty plastics that provide resistance to impact and corrosion.
This sprinkler has the option of 5 quick-release color coded nozzles with a variety
of application rates to fit varying needs. With operating pressures in the range of
35-55 psi and high uniformities this sprinkler is a perfect fit for the K-Line system.
The second and third options both utilize the Nelson R2000WF WindFighter
sprinkler. The Windfighter has a wide variety of nozzles and plates so that the
application rates can be tailored to individual needs. Another excellent feature
of the Windfighter is the option of a pressure regulator. This option greatly
improves uniformity when K-line is used on hilly or undulating ground. The
nelson Windfighter has an operating range between 45-60 psi and provides
another excellent choice for use in the K-line system.
All three options install quickly into the K-line system using either a 40 or
32mm tapping saddle. After drilling the tubing in the desired location
simply insert the tapping saddle over the u-bolt in the bottom of the pod
line up the saddle with the hole in the tubing push down firmly to seat the
o-ring and tighten the two stainless steel nuts.
K-Line Compression Fittings
When installing fittings start with a straight cut on the K-Line tubing, drive the
fitting on squarely, tighten hand tight and firm up with a pipe wrench.
'K-Line Irrigation' is a registered trademark and the K-Line Irrigation system protected by
NZ PAT No 331985, AU PAT No 734210, US PAT No 6398131, US PAT No 6601775, ZA PAT No 2001/2856, CA Pat Appl No 2344281